5 Common Causes of Espresso Channeling and How to Fix Them

 As mentioned earlier, most cases of channeling occur due to improper handling. So if we want to minimize the chances of channeling, it’s worth taking a look at the following points and see which ones you may need to improve.

1. Uneven Distribution of Coffee Grounds

Distribution and tamping are the two key steps before pulling an espresso shot, and the correctness of these steps is directly tied to the likelihood of channeling. Let’s start with distribution. The purpose of distributing the coffee grounds is simple: spread the grounds evenly across every corner of the portafilter basket. Only when the grounds are evenly placed can the puck create consistent resistance throughout, preventing hot water from concentrating on a single area during extraction.

Although the goal is simple, many people still trigger channeling frequently because they don’t distribute properly. Some want to save time, others assume distribution isn’t important, so they casually swipe the grounds to “get it done.” Some skip distribution altogether and move straight to tamping and extraction. All these behaviors significantly increase the risk of channeling and lead to less enjoyable espresso.

So if your distribution process looks like this, it’s worth paying more attention. Doing distribution properly makes it much easier—and more consistent—to pull a delicious shot of espresso.

2. Uneven Tamping Pressure

Next is tamping. After distributing the grounds evenly, the goal is to tamp evenly as well. If the pressure applied during tamping is uneven, then parts of the puck will have higher resistance while other areas will have lower resistance. Naturally, during extraction, hot water will flow toward the low-resistance areas first, resulting in uneven extraction.

Based on this, it’s clear that both distribution and tamping are crucial for a balanced espresso extraction. If you’re unsure how to do them properly, you can look up previous guides from Qianjie—they explain the detailed techniques.

3. Knocking or Bumping the Portafilter

Even if distribution and tamping are done correctly, we shouldn’t relax before extraction begins. Qianjie has noticed that some people are very careless when locking in the portafilter—they don’t line it up carefully and end up bumping or knocking it a few times before getting it in place.

This easily causes channeling because the bumps can create cracks in the puck, allowing hot water to rush through those cracks. To avoid this, try to reduce the number of bumps when locking in the portafilter—aim to get it aligned and locked in one smooth motion.

4. Dose Too Low or Grind Too Coarse

Another common cause comes from the coffee dose and grind size. When the grind is too coarse or the dose is too low, channeling becomes more likely.

Both situations reduce the resistance of the puck, making it easy for hot water to find a weak point and flow through it, causing channeling. The best solutions are to grind finer or increase the dose. Another option is to reduce brewing pressure (pressure profiling), but compared to adjusting grind size or dose, this method is less stable and harder to master. Therefore, Qianjie recommends fixing grind and dose first.

5. Too Many Clumps in the Coffee Grounds

As mentioned earlier, most channeling comes from operational issues, but not all of it. Sometimes the issue lies in the coffee grounds themselves. When grinding, coffee generates static electricity—this increases with finer grind size and dry weather. Static causes the grounds to cling to surfaces or each other, forming clumps.

When there are too many clumps, channeling becomes more likely because clumps create inconsistent resistance within the puck, allowing water to escape from low-resistance spots. This is easy to fix: if you notice a lot of clumps in your grounds, break them up with a WDT tool before distributing and tamping.

If you don’t have a WDT tool, you can also gently tap the portafilter to loosen the clumps, though it’s less efficient.

These are the common causes of espresso spraying and channeling during extraction, along with their solutions. Feel free to use them as references—if you’re making the same mistakes, correcting them will help you pull much better-tasting espresso shots.